Shop > Suspension

Dobinsons Front Upper Control Arm Kit (UCA’s)


•    Complete kit for both left and right hand side, includes new ball joints (Pressed), OE style rubber frame bushings (installed), and washers
•    Has 3 degrees of caster built in, no adjustability or settings required
•    Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2") wall thickness, and powder coated black
•    Works for any lift height of 1.5" or more. Any height less than that, a proper wheel alignment may not be able to be achieved
•    Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
•    For replacement ball joints click (Here)
•    For replacement bushings click (Here)
•    Includes
◦    UCA59-002K (Pair)
◦    BJ59-001 (Pair)
◦    Pressing Service

Instructions (Here)

Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5" or more, due to the built
-in 3 degrees of caster. This will fit 4th Gen 4Runners 2003-2009, 5th Gen 4Runners 2010-2019, Lexus GX470 2003-2009 and Lexus GX460 2010 to 2019 and all generations of Toyota FJ Cruiser (FJC). These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.